Table of Contents
Advertisement
User Manual of DS-8100HFI-ST Series DVR
Note:
Time periods shall not be repeated or overlapped.
4.
Select Handling tab to set up alarm response action of video loss (please refer to Chapter 8.6).
Repeat the above steps to set up arming schedule of other days of a week. You can also use Copy
button to copy an arming schedule to other days.
Click the OK button to complete the video loss settings of the channel.
5.
If you want to set up video loss handling method for another channel, repeat the above steps or just copy
the above settings to it.
8.4 Detecting Video Tampering
Purpose:
Trigger alarm when the lens is covered and take alarm response action(s).
Steps:
1.
Enter Video Tampering interface of Camera Management and select a channel you want to detect video
Figure 8.13 Set Arming Schedule of Video Loss
Figure 8.14 Copy Settings of Video Loss
128
Advertisement
Table of Contents
