Table of Contents
Advertisement
User Manual of DS-8100HFI-ST Series DVR
•
Interval: Time interval between the two synchronizing actions with NTP server. The unit is
minute.
•
NTP Server: IP address of NTP server.
•
NTP Port: Port of NTP server.
5.
Click the Apply button to save and exit the interface.
Note:
The time synchronization interval can be set from 1 to 10080min, and the default value is 60min. If the
DVR is connected to a public network, you should use a NTP server that has a time synchronization function,
such as the server at the National Time Center (IP Address: 210.72.145.44). If the DVR is setup in a more
customized network, NTP software can be used to establish a NTP server used for time synchronization.
9.2.4 Configuring FTP Server
Purpose:
The FTP can be configured on your DVR to realize dual-directional transmission of control files over Internet.
And the captured pictures of DVR can be uploaded to FTP server as well.
Steps:
1.
Enter the Network Settings interface.
Menu > Configuration > Network
2.
Select the FTP tab to enter the FTP Settings interface, as shown in Figure 9.10.
3.
Check the Enable FTP checkbox to enable this feature.
4.
Configure the NTP settings, including FTP server, port, user name, password and the directory.
Figure 9.10 FTP Settings Interface
142
Advertisement
Table of Contents
