User Manual of DS-8100HFI-ST Series DVR
13.3 Configuring More Settings
Steps:
1.
Enter the General Settings interface.
Menu > Configuration > General
2.
Click the More Settings tab to enter the More Settings interface, as shown in Figure 13.3.
3.
Configure the following settings:
•
Device Name: Edit the name of DVR.
•
Device No.: Edit the serial number of DVR. The Device No. can be set in the range of 1~255, and
the default No. is 255.
•
Output Mode: Select the output mode to: Standard, Bright, Gentle or Vivid.
•
CVBS Output Brightness: Adjust the video output brightness.
•
Operation Timeout: Set timeout time for menu inactivity. E.g., when the timeout time is set to 5
Minutes, then the system will exit from the current operation menu to live view screen after 5
minutes of menu inactivity.
4.
Click the Apply button to save the settings.
Figure 13.3 More Settings Interface
189