Table of Contents
Advertisement
User Manual of DS-8100HFI-ST Series DVR
10.1 Initializing HDDs
Purpose:
A newly installed hard disk drive (HDD) must be initialized before it can be used with your DVR.
Steps:
1.
Enter the HDD Information interface.
Menu > HDD>General.
2.
Select HDD to be initialized.
3.
Click the Init button.
4.
Select the OK button to start initialization.
Figure 10.1 HDD Information Interface
Figure 10.2 Confirm Initialization
Figure 10. 3 Start Initialization
154
Advertisement
Table of Contents
