Table of Contents
Advertisement
User Manual of DS-8100HFI-ST Series DVR
Menu > Configuration > Network
2.
Select the More Settings tab to enter the More Settings interface, as shown in Figure 9.14.
3.
Set Multicast IP, as shown in Figure 9.19. When adding a device to the Network Video Surveillance
Software, the multicast address must be the same as the DVR's multicast IP.
4.
Click the Apply button to save and exit the interface.
9.2.8 Configuring RTSP
Purpose:
The RTSP (Real Time Streaming Protocol) is
communications systems to control streaming media servers.
Steps:
1.
Enter the Network Settings menu by clicking Menu > Configuration > Network.
2.
Select the More Settings tab to enter the More Settings menu, as shown in Figure 9.14.
Figure 9.16 Configure Multicast
a
network control protocol designed for use in entertainment and
Figure 9.17 RTSP Settings Interface
146
Advertisement
Table of Contents
