Table of Contents
Advertisement
User Manual of DS-8100HFI-ST Series DVR
5.9 Configuring HDD Group for Recording and
Capture
Purpose:
You can group the HDDs and save the record files and captured pictures in certain HDD group.
Steps:
1.
Enter HDD setting interface.
Menu>HDD
2.
Select Advanced on the left bar.
Check whether the storage mode of the HDD is Group. If not, set it to Group. For detailed information,
please refer to Chapter 10.4 Managing HDD Group.
3.
Select General in the left bar.
Click
to enter editing interface.
4.
Configuring HDD group.
1)
Choose a group number for the HDD group.
2)
Click Apply and then in the pop-up message box, click Yes to save your settings.
3)
Click OK to back to the upper level menu.
Repeat the above steps to configure more HDD groups.
5.
Choose the Channels which you want to save the record files and captured pictures in the HDD group.
1)
Select Advanced on the left bar.
Figure 5.35 HDD General
71
Advertisement
Table of Contents
