Table of Contents
Advertisement
User Manual of DS-8100HFI-ST Series DVR
2.
Choose Camera in the list on the menu.
3.
Choose preset in the Preset list.
4.2.3 Customizing Patrols
Purpose:
Patrols can be set to move the PTZ to different key points and have it stay there for a set duration before moving
on to the next key point. The key points are corresponding to the presets. The presets can be set following the
steps above in Customizing Presets.
Steps:
1.
Enter the PTZ Control interface.
Menu>Camera>PTZ>More Settings
2.
Select patrol number.
3.
Select the
under Patrol option box to add key points for the patrol.
4.
Configure key point parameters, such as the key point No., duration of staying for one key point and
speed of patrol. The key point is corresponding to the preset. The Key Point No. determines the order at
which the PTZ will follow while cycling through the patrol. The Duration refers to the time span to
stay at the corresponding key point. The Speed defines the speed at which the PTZ will move from one
key point to the next.
Figure 4.6 PTZ- Add Key Point
Figure 4.7 Key point Configuration
42
Advertisement
Table of Contents
