TABLE 5
Description
Operating frequency range
Maximum operating current
Maximum AC input
Calculating Power Consumption
The estimated power consumed in a fully powered server depends on the
configuration of the server. For more information on calculating power
consumption, contact your Sun sales representative.
Calculating Heat Dissipation
To calculate the heat generated by a server so that you can estimate the heat your
cooling system must dissipate, convert the figure for the server's power requirement
from Watts to BTU/hr. A general formula for doing this is to multiply the power
requirement figure in Watts by 3.412.
Shipping Kit Contents
The server is supplied with the components described in the following list:
Rackmount kit
■
Cat5 RJ-45 cable
■
Accessories kit:
■
■
■
■
■
■
■
Note – The contents of the shipping kit might vary, depending on any options that
you have ordered. Ensure that all the basic parts, as described in the list, are present
in the shipping kit. If any component is missing, contact your Sun sales
representative.
8
Sun Fire V215 and V245 Servers Getting Started Guide • September 2006
Operating Power Limits and Ranges
RJ-45 adaptor
Sun Fire V215 and V245 Getting Started Guide (819-3041)
Important Safety Information for Sun Servers (816-7190)
Sun Server Documentation (819-4953)
Entitlement for Solaris 10 6/06 (819-5836)
Software License Agreement (819-0764)
Sun Fire V215 Server
47 - 63 Hz
8 Amps @ 90 VAC
670 watts
Sun Fire V245 Server
47 - 63 Hz
8 Amps @ 90 VAC
670 watts