Table of Contents
Advertisement
6. Obtaining the latest configuration instructions for your server.
After you power the server on, you will automatically be taken through the
Solaris OS configuration procedure. Therefore, before you power on the server, go
to the following site to obtain the latest configuration details:
http://www.sun.com/software/preinstall/index.xml
7. Powering on the server and configuring the preinstalled software.
The Solaris OS and the Java Enterprise System software are preinstalled on the
server.
To power on the server and configure the preinstalled software, refer to the Sun
Fire V215 and V245 Servers Installation Guide for instructions.
8. Obtaining the latest updates and patches.
Use the appropriate links on the preinstalled software site to obtain the latest
updates and patches.
9. Setting the desired OpenBoot™ PROM configuration options.
The initial boot will test the entire system. You can change the level of testing by
using the OpenBoot PROM commands and configuration variables. To change the
boot test level and other boot variables, refer to the OpenBoot PROM Enhancements
Diagnostics Operation.
10. (Optional) Loading additional software from the Solaris OS media kit.
The Solaris OS media kit is sold separately. The kit includes several CDs
containing software to help you operate, configure, and administer your server.
Refer to the documentation provided in the media kit for a complete listing of
included software and detailed instructions.
Site Preparation
Before you install the Sun Fire server, you must prepare the site. This section
includes information and links to information you need to prepare the site.
4
Sun Fire V215 and V245 Servers Getting Started Guide • September 2006
Advertisement
Table of Contents
