System Setup; Protection Areas; Outputs - Security Command XR20 User Manual

System Setup

We have provided this System Setup section to allow you to track the
current status of the programmable options on your Security Command
system. If you make changes to the system, you should update the
information contained on these pages.
My system is monitored by a central station.
Yes No
C/S Name:
Address:
City/State:
Emergency Phone:
Service Phone:
Service Manager:
My system sends Opening and Closing reports.
Yes No
My system sends Zone Bypass reports.
Yes No
My system sends Ambush reports.
Yes No
System Setup

Protection Areas

Number Description
1 ____________________________________________
2 ____________________________________________
3 ____________________________________________
4 ____________________________________________

Outputs

Your system has 4 outputs that can be used for various functions.
Below is a list of these outputs and the devices they control.
Output # What it controls
1 ____________________________________________
2 ____________________________________________
3 ____________________________________________
4 ____________________________________________
Enter the Output number above when using the Outputs On Off User
Menu option to manually toggle the outputs.
25