System Setup
We have provided this System Setup section to allow you to track the
current and future status of the programmable options on your
Security Command system. If you make changes to the system, you
should update the information contained on these pages.
Your system is monitored by a central station.
Yes
No
C/S Name:
_____________________________________
Address:
_____________________________________
City/State:
_____________________________________
Emergency Phone: _____________________________________
Service Phone:
_____________________________________
Service
_____________________________________
Your system sends Opening and Closing reports.
Yes
No
Your system sends Zone Bypass reports.
Yes
No
Your system sends Ambush reports.
Yes
No
20
Security Command keypads
Address
1 _____________________________________________
2 _____________________________________________
3 _____________________________________________
4 _____________________________________________
Outputs
Your system has 4 outputs that are used to control various functions
within the building or around its perimeter. Below is a list of these
outputs and the devices they control.
Output #
1 _____________________________________________
Manager:
2 _____________________________________________
3 _____________________________________________
4 _____________________________________________
Enter the Output number above when using the Outputs On Off User
Menu option to manually toggle the outputs.
Locations
What it controls
System Setup
Need help?
Do you have a question about the Command Processor XR6 and is the answer not in the manual?