Table of Contents
Advertisement
FA113 User's Guide
These instructions guide you through the operation of the XR20 Command Processor system using the FA113 Wireless Keychain
Remote. The FA113 uses the audible output capability of the Security Command keypad to sound confirmation tones. It is recommended
that you use the FA113 within hearing distance of these keypads.
Arming a Home/Away or All/Perimeter System
1. Press the ON button once to arm the Perimeter burglary protection. The Security Command keypads emit a single beep to confirm the
arming. The Perimeter arms and all non-priority zones not in a normal condition are force armed.
2. After the single beep, press the ON button a second time to arm the Interior burglary protection. The Security Command keypads emit
two beeps to confirm the arming.
3. After the two beeps, pressing the ON button in Home/Sleep/Away systems arms the Bedrooms burglary protection. The Security
Command keypads emit three beeps to confirm the arming.
Disarming a Home/Away or All/Perimeter System
1. Press the OFF button once. The Security Command keypads emit a single 2-second beep to confirm the disarming.
Arming an Area System
1. Press the ON button once to arm the following areas:
1. ___________________
The Security Command keypads emit a single beep to confirm the arming.
Disarming an Area System
1. Press the OFF button once to disarm the above areas. The keypads emit a single beep to confirm the disarming.
Using the ALERT Buttons
Pressing the two ALERT buttons simultaneously sends a Panic alarm to the panel. If your system is monitored by a central station, the
proper authorities will be notified of the alarm.
30
2. ___________________
3. ___________________
4. ___________________
Appendix
Advertisement
Table of Contents
