Table of Contents
Advertisement
1. Call the panel phone number. The panel answers and sounds one
short tone.
2. Enter your code within 8 seconds. One beep means the code is
good. Four short beeps means enter it again. You have 3 tries.
3. You have 30 seconds to enter the first command (see other side)
and 30 seconds for each additional command.
If
All areas are armed
Area 1 (Perim) is armed
Any area is armed
All areas are disarmed
1. Call the panel phone number. The panel answers and sounds one
short tone.
2. Enter your code within 8 seconds. One beep means the code is
good. Four short beeps means enter it again. You have 3 tries.
3. You have 30 seconds to enter the first command (see other side)
and 30 seconds for each additional command.
If
All areas are armed
Area 1 (Perim) is armed
Any area is armed
All areas are disarmed
34
895 Voice Module
You can also use the 895 Voice Module with the XR20 Command
Processor™ panel. The 895 allows you to call your security system
using a touch-tone telephone, and perform a variety of functions,
ranging from arming and disarming to changing user codes. The 895
operates much like a voice mail system, providing you with easy to
follow English language prompts.
You will hear
The 895 Voice Module provides you with easy-to-understand prompts
3 short beeps
that lead you through the steps to control your security system. Using
1 short beep
your present User Code and User Code Level, you will have access
2 short beeps
to the same options of your system using the 895 as you would when
1 long beep
using a keypad to control your security system.
The 895 Voice Module easily mounts into the enclosure presently
housing your XR20 Command Processor™ panel. The standard
three-hole configuration allows for easy and quick installation.
For more information about the 895 Voice Module, refer to LT-0421,
the 895 Voice Module User's Guide.
You will hear
3 short beeps
1 short beep
2 short beeps
1 long beep
Appendix
Advertisement
Table of Contents
