System Setup; System Setup Record; Protection Areas; Outputs - Security Command XR20 User Manual

System Setup Record

This System Setup section is provided to allow you to track
the current status of programmable options on your Security
Command™ system. If you make changes to the system, you should
update the information contained on these pages.
Your system is monitored by a central station.
 Yes  No
C/S Name: _______________________________________
Address: _________________________________________
City/State: _______________________________________
Emergency Phone: _________________________________
Service Phone: ____________________________________
Service Manager: __________________________________
Your system sends Opening and Closing reports.
 Yes  No
Your system sends Zone Bypass reports.
 Yes  No
Your system sends Ambush reports.
 Yes  No

System Setup

System Setup

Protection Areas

Your system may be divided into four separate areas, each area can
have a name or description that displays at the keypad. This can help
you easily track events when they occur elsewhere in your system.
Area #
1
2
3
4
Output Record
Your system has outputs that can be used for various functions. The
list below identifies the output numbers and device names.
Output #
___________
___________
___________
___________
___________
___________
___________
___________
Use the Output number in the User Menu when using the Outputs
On Off option to manually operate the relays.
XR20 User's Guide
What it Controls
_______________________________________
_______________________________________
_______________________________________
_______________________________________
What it Controls
_______________________________________
_______________________________________
_______________________________________
_______________________________________
_______________________________________
_______________________________________
_______________________________________
_______________________________________
31