System Setup; Protection Areas - Security Command XR20 User Manual

System Setup

We've provided this System Setup section to allow you to track the
current status of the programmable options on your Security
Command system. If you make changes to the system, you should
update the information contained on these pages.
My system is monitored by a central station.
Yes No
C/S Name:
Address:
City/State:
Emergency Phone:
Service Phone:
Service Manager:
My system sends Opening and Closing reports.
Yes No
My system sends Zone Bypass reports.
Yes No
My system sends Ambush reports.
Yes No
24 System Setup

Protection Areas

Number Description
1
2
3
4
Outputs
Your system has 4 outputs that can be used for various functions.
Below is a list of these outputs and the devices they control.
Output # What it controls
1
2
3
4
Enter the Output number above when using the Outputs On Off User
Menu option to manually toggle the outputs.
User Codes
Your system provides 32 user codes you can program for individual
users. As you add new users or change current users' codes, you
can keep track of their name, user number, and other information
here in this section. Use a pencil to allow for changes.