Display Events; Zone Activity Check Event Display - Security Command XR20 User Manual

Display Events

User Code Level: Master or Standard.
Function: Allows you to review up to 100 past events that occurred
on your system from any keypad. Once 100 events are stored, any
new event causes the oldest event to be cleared.
Note: This section shows the User's
Guide Display Events items for both
16-character (single line) and
32-character keypad displays. While
in the Display Events function, use the
COMMAND and ARROW keys to go
forward or backward through the list of
events.
Using the Display Events Function
1. Access the User Menu.
2. Press the COMMAND key until DISPLAY EVENTS? displays.
Press any SELECT key.
3. The keypad displays FIRST LAST. Select FIRST to view events
starting from the oldest to the newest. Select LAST to view
events starting from the newest to the oldest.
If you select FIRST, use the COMMAND key to scroll up through
the events displays.
If you select LAST, use the ARROW key to scroll down through
the event displays.
User Menu
SELECT keys
POWER JONES RESIDENCE
F R I 2 : 51 AM
ARMED
1 2
A B C D E F
5 6
MN O P Q R
9 0
Y Z
COMMAND key
ARROW key

Zone Activity Check Event Display

This displays the date and time the Zone Activity Check was enabled
or disabled.
16-Character Display
ACT ENABLED 10/17
32-Character Display
5:18P 10/17
3 4
G H I J K L ACT DISABLED
8
7
S T U V W X
5:18P 10/17
COMMAND
Activity Check Event Types - There are 3 event types:
ACT DISABLED
Description
The Zone Activity Check was enabled on
October 17.
Description
The Zone Activity Check was disabled
on October 17, at 5:18 pm.
ACT ENABLED NO ZONE ACTIVITY
21