Entry Delay; Using The Access Reader For User Menu Access - Security Command XR20 User Manual

ARMING AND DISARMING AN ALL/PERIMETER SYSTEM
Press Command. The keypad displays PERIM ALL (when arming) or DISARM?.
Press the Select key under the option. The keypad displays ENTER CODE: -.
Present your card to the reader. Once it is validated by the system, both areas arm
or disarm automatically and the Door Strike relay activates.
ARMING AND DISARMING A HOME/AWAY SYSTEM
Home/Away system Arming and Disarming - Present your card to the reader. If the system
is armed, once the card is validated all areas are disarmed.
If the system is disarmed when you present your card, once it is validated all areas are armed
in the AWAY mode.

ENTRY DELAY

All Systems - Once the protected door is opened and the entry delay
starts, the keypad displays ENTER CODE: -. Present your card to the
reader and, once it is validated, the system disarms all areas accessible
by you and activates the Door Strike relay. Area systems provide a delay
to allow selected areas only to be disarmed. See Arming and Disarming
above.

Using the access reader for user menu access

You can also use a card reader to access the User Menu when the
MENU? NO YES display is shown.
Appendix
PERIM ALL
or
DISARM?
POWER
ABC SECURITY
FRI
POWER
ABC SECURITY
ENTER CODE: -
POWER
Access door is
opened.
The system disarms the areas and activates the Door
Strike relay. Area systems allow a delay for you to
select only certain areas. See Arming and Disarming.
The system arms or
disarms the areas
and activates the
Door Strike relay.
2: 5 1 A M
POWER
29