Display Events; Zone Bypass Event Displays - Security Command XR20 User Manual

Display Events

User Code Level: Master or Standard.
Function: Allows you to review up to 100 past events that occurred
on your system from any keypad. Once 100 events are stored, any
new event causes the oldest event to be cleared.
Note: This section shows the User's
Guide Display Events items for both
16-character (single line) and 32-
character keypad displays. While in
the Display Events function, use the
COMMAND and ARROW keys to go
forward or backward through the list of
events.
Using the Display Events Function
1. Access the User Menu.
2. Press the COMMAND key until DISPLAY EVENTS? displays.
Press any SELECT key.
3. The keypad displays FIRST
events starting from the oldest to the newest. Select LAST to
view events starting from the newest to the oldest.
If you select FIRST, use the COMMAND key to scroll up through
the events displays.
If you select LAST, use the ARROW key to scroll down through
the event displays.
SELECT keys
POWER JONES RESIDENCE
F R I 2 : 51 AM
1 2
A B C D E F
5 6
M N O P Q R
9 0
Y Z
ARROW key
COMMAND key
LAST. Select FIRST to view

Zone Bypass Event Displays

This displays the bypassing of system zones.
16-Character Display
26 BYPS 1 2 1017
32-Character Display
3 4
G H I J K L
7 8
BYP 5:18P 10 / 17
S T U V W X
COMMAND
EAST W I NDOW
Bypass Event Types - There are 4 event types:
BYP - Bypass
FLT - Zone Fault
Note: You may sometimes see the user as SWG or SCH. These are
short for Swinger Bypass and Schedule which are automatic functions
that allow the system to bypass a zone.
Description
Zone 26 bypassed by user 12. Press the
left Select key for the zone name and
the right Select key for the time.
Description
The east window zone was bypassed.
Press a Select key for the zone number
and user number.
RST - Restore FRC - Force Arm
21
User Menu