Gas Supply & Connections - HearthStone Bristol DX Owner's Manual

Gas-fired direct-vent heater
Hide thumbs Also See for Bristol DX:
Table of Contents

Advertisement

Hearthstone Quality Home Heating Products, Inc.
Bristol DX Model 8762
Gas Supply & Connections
NOTE: Ensure the gas line is installed as close to the floor as possible to avoid interference or conflict with
a blower assembly installation.
Figure 25 - Gas Control Valve
NOTICE:
A
QUALIFIED
TECHNICIAN
MUST
CONNECT THE HEATER TO THE GAS SUPPLY
AND LEAK TEST THE UNIT BEFORE IT IS
APPROVED FOR USE. CONSULT ALL CODES.
WARNING: THE UNIT MUST BE INSTALLED AND
CONNECTED IN ACCORDANCE WITH LOCAL
CODES, OR IN THE ABSENCE OF LOCAL CODES,
WITH THE MOST CURRENT EDITION OF THE
NATIONAL FUEL GAS CODE ANSI Z223.1 (NFPA
54) OR CAN/CGA B149 INSTALLATION CODE.
NFPA Code and Hearthstone require the use of
a dedicated sediment trap just upstream of the
unit. Damage to the valve, or other components
due to the lack of a sediment trap are not
covered by warranty (see figure 27).
Figure 26 - Sediment Trap (Typical)
26

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bristol dx 8762

Table of Contents