Table of Contents
Advertisement
Quick Links
Ce manual est disponible en Francais a
www.hearthstonetech.com
Bristol DX
GAS-FIRED DIRECT-VENT HEATER
Owner's Manual
Installation & Operating
Read This Manual in Its Entirety
Operate And Maintain This Gas Heater
According To This Instruction Manual.
SAVE THESE INSTRUCTIONS!
California Prop 65
WARNING: This product can expose you to
chem icals including glass w ool fiber and carbon
m onoxide w hich are known to the State of California to
cause cancer, birth defects or other reproductive harm.
For m ore information go to www.P65Warnings.ca.gov
-
Ne pas entresposer ni utiliser d'essence ni d'autre
vaperurs ou liquides inflammables dans le voisinage
de cet apprareil ou de tout autre appareil.
-
QUE FAIRE SI VOUS SENTEZ UNE ODEUR DE GAZ:
•
Ne pas tenter d'allumer d'appareil.
•
Ne touchez à aucun interrupteur. Ne pas vous
servir des téléphones se trouvant dans le
batiment où vous vous trouvez.
•
Quittez le bâtiment immédiatement.
•
Appelez immédiatement votre fournisseur de gaz
depuis un voisin. Suivez les instructions du
fournisseur.
•
Si vous ne pouvez rejoindre le fournisseur de
gaz, appelez le service dos incendies
-
L'installation et l'entretien doivent être assurés par
un installateur ou un service d'entretien qualifié ou
par le fournisseur de gaz.
Hearthstone Quality Home Heating Products, Inc. ®
(Model 8763)
Instructions
Report # 0261GF005S
Bristol 8763
Manual: 6400-40473
R: 11-28-18
Advertisement
Table of Contents
Related Manuals for HearthStone Bristol DX
Summary of Contents for HearthStone Bristol DX
- Page 1 L’installation et l’entretien doivent être assurés par un installateur ou un service d’entretien qualifié ou par le fournisseur de gaz. Hearthstone Quality Home Heating Products, Inc. ® Ce manual est disponible en Francais a Bristol 8763 www.hearthstonetech.com...
-
Page 2: Table Of Contents
INDEX Notes………….…………………………………………………………………………………….. 2 Specifications………………………………………………………………………………………4 Introduction………………………………………………………………………………………...5 Safety Information…………………………………………………………………………………5 Installation Preparation…………………………………………………………………………..8 Codes……………………………………………………………………………………………………………..8 Items Required for Installation………………………………………………………………………………… Unpackaging and Inspection……………………………………………………………………. Packing List Clearances to Combustibles……………………………………………………………………. 9 Hearth Requirement/Floor Protection………………………………………………………………………….. 10 Venting Information……………………………………………………………………………... 11 Venting Connection……………………………………………………………………………………………..11 Approved Systems……………………………………………………………………………………………..11 Minimum Venting………………………………………………………………………………………………..13 Vertical Vent Kit Installation........................ - Page 3 NOTE ON BATTERY INSTALLATION IN RECEIVER Please refer to pages 31-38 of this manual for operation of Maxitrol GV-60 gas control system. The following illustration is intended only to identify component location and receiver removal for installation of the 4 AA batteries included in your stove.
-
Page 4: Notes
Information Sheet Use this page to record all relevant information concerning the purchase, installation, and maintenance of your Bristol Model 8763 Direct -Vent heater. This information will facilitate servicing, purchase of replacement parts, and warranty claims (if necessary). Keep your original receipt in a safe place as proof of purchase. Serial Number: Fuel type: Natural Gas... -
Page 5: Specifications
Hearthstone Quality Home Heating Products, Inc Bristol Model 8763 Specifications Testing Agency: OMNI- Test Laboratories, Inc. Certified for use by: PO Box 301367 Board of State Examiners of Plumbers and Gasfitters Portland, OR 97294 100 Cambridge Street, Room 1511 Listed: Direct Vent Gas Heater... -
Page 6: Introduction
8763-0010 Matte Black Model 8763, Gas-Fired Direct-Vent heater. The 8763-0020 Brown Enamel Bristol, by Hearthstone, incorporates the latest in 8763-0030 Basil Enamel direct vent gas technology, which will provide you with clean, efficient heat for years to come. The Read this Owner’s Manual enameled or painted cast iron gives the Bristol a pleasing look that is maintained with minimum care. - Page 7 Use of any components not supplied by AWAY FROM FURNITURE, DRAPERIES, CLOTHING AND FLAMMABLE MATERIALS. EN RAISON DES Hearthstone on the stove voids all warranties. Do not TEMPÉRATURES ÉLEVÉES, L’APPAREIL DEVRAIT substitute components. ÊTRE INSTALLÉ DANS UN ENDROIT OÙ IL Y A PEU...
- Page 8 Hearthstone Quality Home Heating Products, Inc Bristol Model 8763 REDUCE THE RISK OF BURNS FROM THE HOT components affect the combustion quality and safety VIEWING GLASS ARE PROVIDED WITH THIS of the heater. Do not replace ceramic logs, the burner,...
-
Page 9: Installation Preparation
Hearthstone Quality Home Heating Products, Inc Bristol Model 8763 Pipe sealant approved for use with Installation Preparation propane (LP) (resistant to sulfur compounds). Manual shutoff valve Codes Sediment trap (see page 20) Pipe wrench Adhere to all local codes or, in their absence, the... - Page 10 Hearthstone Quality Home Heating Products, Inc Bristol Model 8763 3. Remove glass and frame by holding the glass retainer tab with one hand while compressing the glass retention spring forward with the other and lifting the bolt heads slightly clear of the stove glass frame one at a time (Figure 3).
-
Page 11: Clearances To Combustibles
Hearthstone Quality Home Heating Products, Inc Bristol Model 8763 Hearth Requirement/Floor Protection You can place the Bristol directly on any non- Figure 4 combustible surface or on a wood floor. When placing the Bristol on any other type of combustible surface you must install a panel made of metal, wood, stone, or glass under the appliance. -
Page 12: Venting Information
Hearthstone Quality Home Heating Products, Inc Bristol Model 8763 Venting Terminations The Bristol cannot be vented jointly with any other solid fuel or gas appliance. It must be vented directly to the outside of the building using a proper termination as listed in this manual. After determining... - Page 13 Hearthstone Quality Home Heating Products, Inc Bristol Model 8763 A listed fire stop is required at any floor solid fuel listed chimneys. The following installation penetration. The opening must be framed in requirements must be followed: according venting manufacturer’s The termination must fall within the chart shown instructions.
-
Page 14: Minimum Venting
Hearthstone Quality Home Heating Products, Inc Bristol Model 8763 CAUTION: FOR BUILDINGS WITH VINYL SIDING, Horizontal Termination INSTALL A VINYL SIDING STANDOFF BETW EEN The termination must fall within the area shown in THE VENT CAP AND THE EXTERIOR WALL. -
Page 15: Vertical Vent Kit Installation
Hearthstone Quality Home Heating Products, Inc Bristol Model 8763 Installing the Vertical Vent Kit When the total vertical vent run in a particular Bristol installation meets or exceeds 8’, the Vertical Vent Kit must be installed in the stove. This kit is shipped with... - Page 16 Hearthstone Quality Home Heating Products, Inc Bristol Model 8763 The ring shaped metal piece installs in the starter collar on the top of the stove, from the outside before venting is attached by the following method: 1) Note the two tabs extending into the inner flue collar from the upper manifold housing.
- Page 17 Hearthstone Quality Home Heating Products, Inc Bristol Model 8763 Figure 11 - Acceptable Direct Vent Terminal Vent Cap Locations A = Clearance above grade, veranda, porch, deck, H = *Not to be installed within 15 feet (4.5m) above a meter/regulator assembly within 3 feet (91cm) or balcony: 12 inches (30cm) minimum.
- Page 18 Hearthstone Quality Home Heating Products, Inc Bristol Model 8763 Figure 12 - Venting Termination...
-
Page 19: Electrical System Information
Hearthstone Quality Home Heating Products, Inc Bristol Model 8763 Electrical System Information CAUTION: LABEL ALL WIRES PRIOR TO DISCONNECTION WHEN SERVICING CONTROLS. WIRING ERRORS CAN CAUSE IMPROPER AND DANGEROUS OPERATION. VERIFY PROPER OPERATION AFTER SERVICING. (ATTENTION: AU MOMENT DE L’ENTRETIEN DES COMMANDES, ÉTIQUETEZ TOUS LES FILS AVANT LE DÉBRANCHEMENT. -
Page 20: Gas Supply & Connections
NOT try to repair it. Call a qualified service NFPA Code and Hearthstone require the use of a technician. Force or attempted repair will dedicated sediment trap just upstream of the unit. -
Page 21: Initial Leak Check
Hearthstone Quality Home Heating Products, Inc. Bristol DX Model 8763 PERFORM INITIAL GAS LEAK TEST GAS CONNECTIONS When threads are tightened, the valve must be held 1. Check carefully for gas leaks immediately after designated clamping areas (see the appliance has been installed and the gas Figure 15). - Page 22 Hearthstone Quality Home Heating Products, Inc. Bristol DX Model 8763 • While keeping pressure on the cables and plastic insert, tighten the thermocouple 1/4 to 1/2 turn beyond finger tight (2...3 Nm). Ignition Cable Do NOT damage the ignition cable. When the cable is in place, avoid contact with sharp objects or edges.
-
Page 23: Initial Lighting Instructions
Hearthstone Quality Home Heating Products, Inc. Bristol DX Model 8763 4. Locate and turn the MANUAL Knob on the Initial Lighting Instructions valve clockwise to the “MAN” position (see Figure 16). Use a gas sniffer device or smell all around the 5. -
Page 24: Pilot Adjustment
Hearthstone Quality Home Heating Products, Inc. Bristol DX Model 8763 CAUTION: THE PILOT FLAME SHOULD ONLY BE 15). ADJUSTED AUTHORIZE D SERVICE 2. Turn MANUAL knob and main valve knob to the TECHNICIA N. ON position. 3. Turn pressure regulator adjustment screw to set The pilot flow adjustment is preset to maximum at the required burner pressure (high fire). -
Page 25: Lp Conversion
Hearthstone Quality Home Heating Products, Inc. Bristol DX Model 8763 7. Using a 4mm (5/32”) allen wrench, loosen Convertible regulators are designed to deliver either of two fixed outlet pressures for Natural Gas (NG) or and remove the existing low pressure NG LP Gas. - Page 26 Hearthstone Quality Home Heating Products, Inc. Bristol DX Model 8763 Figure 23 – NG Low Flow Screw Removal Figure 20 – Low Flow Orifice Location Figure 21 – Low Flow Orifice Removal Figure 24 – Press LP Orifice into Valve to Compress O-ring Figure 22 –...
- Page 27 Hearthstone Quality Home Heating Products, Inc. Bristol DX Model 8763 To Switch the Pilot to LP Operation: (Refer to Figures 26-29) The pilot assembly in the Bristol is a slide convertible unit, only requiring access from the firebox and a 7/16”...
-
Page 28: Firebox/Log Set Placement
Hearthstone Quality Home Heating Products, Inc. Bristol DX Model 8763 TO SHUT DOWN THE APPLIANCE AND TURN OFF GAS Remote Control: 1. Push the OFF button on the remote once See page 31). 2. Remove valve access panel. 3. Turn the ON/OFF switch on the valve to OFF. - Page 29 Hearthstone Quality Home Heating Products, Inc. Bristol DX Model 8763 Figure 33 – Log 3 in Position Figure 30 – Burner Without Log Set Detail 5. Place log 4 on top of log 1 as shown. 2. Place log 1 on burner in its channel as shown.
-
Page 30: Removal
Hearthstone Quality Home Heating Products, Inc. Bristol DX Model 8763 Refer to Figure 12 on page 17 for minimum required Removal of Log Set settings. Some conditions cannot be corrected CAUTION: THE LOG SET, BURNER, AND EMBERS through air shutter adjustment; an adjustment must... -
Page 31: Air Shutter
Hearthstone Quality Home Heating Products, Inc. Bristol DX Model 8763 Figure 37 – Locking Screw and Motion Direction Figure 39 - Restrictor Fully Opened (no restriction) qualified service personnel. Do not attempt to Burner Flame Appearance complete any part of the installation or adjustment of Once the unit is lit, observe the flame pattern and this unit unless technically qualified to do so. -
Page 32: Maxitrol Gv60 Control System Features
Hearthstone Quality Home Heating Products, Inc. Bristol DX Model 8763 THERMOCOUPLE/INTERRUPTER BLOCK Maxitrol GV60 Control 11/32-32 UNS, M10x1, M9x1, M8x1 System Features AMBIENT TEMPERATURE RANGE Combination control: 32 F to 176 F (0 C to 80 NOTE: REMOVE THE MODESTY PANEL BELOW... -
Page 33: Sync Receiver To Remote/Starting The Appliance
Hearthstone Quality Home Heating Products, Inc. Bristol DX Model 8763 dimmer includes mains power together with Manual Ignition/Operation batteries in the receiver for automatic backup in case of power outage. 1. Remove orange ignition wire from Control • Without using a mains adapter, battery... -
Page 34: Daily Operation
Hearthstone Quality Home Heating Products, Inc. Bristol DX Model 8763 DAILY OPERATION TO TURN OFF APPLIANCE TURN ON THE APPLIANCE Handset • Press OFF button Handset Wall Switch/Touch • Simultaneously press the OFF Pad/Switch Panel and & large flame buttons until a Press button “B”... - Page 35 Hearthstone Quality Home Heating Products, Inc. Bristol DX Model 8763 Designated Low Fire and High Fire ▪ Double-click small flame button. "LO" will be displayed. NOTE: Flame goes to high fire first before going to designated low fire. ▪ Double-click large flame button.
- Page 36 Hearthstone Quality Home Heating Products, Inc. Bristol DX Model 8763 Press small flame button to Decrease fan speed. To Circulating Fan Mode turn OFF fan, press small flame button until all 4 speed level bars disappear. See discussion above. NOTE: 8 seconds after the fan has been set, the handset will automatically go into temperature control mode (CSA version).
- Page 37 Hearthstone Quality Home Heating Products, Inc. Bristol DX Model 8763 SETTING THE TIME Setting the NIGHTTIME SETBACK Temperature DEFAULT SETTINGS: “__" (OFF) ▪ The Time display will flash after either: • Briefly press SET button to a) Installing the battery or b) Simultaneously pressing TEMP mode (moon icon).
- Page 38 Hearthstone Quality Home Heating Products, Inc. Bristol DX Model 8763 • Setting P1 ON Time Briefly press SET button to scroll to setting P1 OFF time (P1 and moon) is • Hold the SET button until displayed and the time P1 and the sun icon flashes.
-
Page 39: Routine Maintenance And Care
WARNING: DO NOT SUBSTITUTE MATERIALS. venting section of this manual. For replacement parts, or for information about parts or service, contact your local Hearthstone dealer. Any safety screen or guard removed for servicing an appliance must be replaced prior to operating the appliance. - Page 40 Hearthstone Quality Home Heating Products, Inc. Bristol DX Model 8763 functionality during power outages, and to give the Annually: environment a break. Clean Firebox, Pilot, & Burner Assembly Remote Transmitter Battery Replacement The firebox requires periodic cleaning to prevent the You can easily change the Remote Transmitter accumulation of dust, lint, and other debris.
- Page 41 Hearthstone Quality Home Heating Products, Inc. Bristol DX Model 8763 glass. Peel the adhesive protecting paper away As Needed: from one end. Starting at the middle of the bottom edge of the glass apply the gasket centered on Glass and Gasket Replacement the edge of the glass.
- Page 42 Hearthstone Quality Home Heating Products, Inc. Bristol DX Model 8763 glass. Peel the adhesive protecting paper away from one end. Starting at the middle of the bottom edge of the glass apply the gasket centered on the edge of the glass.
-
Page 43: Parts List
Key: XX = Finish (e.g. 10 = Matte Black Paint) – Specify finish required when ordering parts WARNING: DO NOT SUBSTITUTE MATERIALS. FOR REPLACEMENT PARTS, OR FOR INFORMATION ABOUT PARTS OR SERVICE, CONTACT YOUR AUTHORIZED HEARTHSTONE RETAILER. For the name of the authorized retailer nearest to you, visit our website www.hearthstonestoves.com... -
Page 44: Troubleshooting
Hearthstone Quality Home Heating Products, Inc Bristol DX Model 8763 Troubleshooting Symptom Possible Cause Corrective Action 1. Pilot will not light. A. Optional Power supply not A. Ensure power supply is plugged in and receiving 120V plugged in and/or batteries are AC. - Page 45 Hearthstone Quality Home Heating Products, Inc Bristol DX Model 8763 Symptom Possible Cause Corrective Action 5. Frequent pilot outage. A. Pilot flame may be too low or A. Clean and/or adjust the pilot flame for maximum blowing, (high), causing the pilot impingement on the thermocouple.
-
Page 46: Rating Label
Hearthstone Quality Home Heating Products, Inc Bristol DX Model 8763 Rating Label... -
Page 47: Warranty
) year after the Purchase Date, Hearthstone will pay for warranty labor performed by an authorized Dealer at Hearthstone’s published labor rates in effect at the time the labor is performed only if the appliance is installed by an authorized dealer or their designated representative. Otherwise or thereafter, the Original Purchaser is responsible for the cost of labor. - Page 48 Hearthstone or an authorized Dealer, as the case may be. Notwithstanding any other provision of this document, in no event will Hearthstone pay for any Dealer fees or other fees for pick up or delivery of the appliance returned for repair; the Original Purchaser shall be responsible for any such fees.
- Page 49 Dealer on behalf of Hearthstone, as the case may be, will instruct the Original Purchaser to either return the defective part, or the entire appliance (if requested), to the Dealer or Hearthstone or allow a Dealer to make a service call at the place where the appliance is located. Hearthstone may require that a digital picture be provided to support the claim.