Usb Booting Issues; Software Troubleshooting; Touchscreen Issues; Network Issues - PSC Falcon 4620 User Manual

Troubleshooting

USB Booting Issues

It is possible to boot the unit using a USB floppy drive or USB CD-ROM
drive. When attempting to boot, if the unit does not access the boot device,
turn the unit off and try booting using the other USB port.

Software Troubleshooting

Touchscreen Issues

If the touch screen stops working, reinstall the touch screen drivers. They are
located at D:\DRIVERS\TBSOFT directory.
1. Run SETUP.EXE in D:\TBSOFT directory.
2.
3. Select
4.
To calibrate the touch screen, select Calibrate under
UPPD

Network Issues

1. Right click on
2. Select
3. Under
4. If it does, it should be re-installed from the drivers on the D:\DRIV-
User's Guide
should be 1.
Number of devices
logical device segment
Desktop.
Semtech, ScreenCoder JLT, PS/2.
Controller type is
.
My Computer
Properties > Hardware >, Device Manager
Network Adapters
have any yellow exclamation marks or red circle with a slash.
ERS\NETWORK directory.
for device #1 should be set to Whole
.
.
, make sure that there is a device and it does not
Start > Programs >
47