PSC Falcon 4620 User Manual page 30

Installing the Falcon
Figure 3. Ram Ball Mount
10. Align and replace the power cord stabilizer, inserting the power cord
11. Connect all assessor and peripheral cables and cords to the Falcon 4620,
It is extremely difficult to connect peripherals once the Ram Ball mount is assem-
bled, so it is important to attach these cable connections in Step 11. Refer to the
Falcon 4620 User's Manual for more information on connecting accessories.
16
®
4620
Adjustment
Knob Handle
between the two plastic clamps and tightening the screws onto the com-
puter. Refer to
Figure 1
including the keyboard and PowerScan RF unit.
3. Using four of the screws
4. Attach the Ram Ball
5. Make sure that the com-
6. Lay the computer on its
7. Affix the computer H
8. Remove the power cord
9. Firmly insert the power
.
provided with the unit,
affix one of the Ram balls
to the desired mounting
surface. Set the other one
aside; you will use it later
in the assembly process.
Mount to the Ram Ball
you just affixed to the
mounting surface.
puter is turned off.
face on a soft surface.
Plate to the four mount-
ing holes in the back of
vehicle mount computer.
Refer to .
Figure 1
stabilizer from the unit.
Refer to .
Figure 1
cord into the power port
with the arrow facing up.
®
Falcon 4620 VMC