Installing the Falcon
8. Attach the top portions of the mounting assembly to the wall, fork lift,
Top/Wall Mount Installation
All mounting holes on the Falcon 4620 take metric size M6x20 screws. All
accessible screws are metric sizes.
Attach the Falcon 4620 to the Mounting Bracket
1. Make sure that the Falcon 4620 is turned off.
2. Position the Falcon 4620 on the computer back plate, matching the
3. Line up a lock washer and insert a phillips head screw into each of four
Figure 1. Falcon 4620 Mounting Holes for Computer Back Plate
4. Insert the connector cable for each peripheral and accessory into the
10
®
4620
vehicle, or mounting surface; leave the keyboard and scanner tray for
later. Refer to "Mount the Keyboard and PowerScan Trays" on page
mounting holes in the bracket to the mounting holes on the back of the
Falcon 4620. Refer to
(4) holes.
appropriate port, as illustrated in Figure 2 on page
for the location of the mounting holes.
Figure 1
Mounting holes
.
13
Power Cord
Stabilizer
.
11
®
Falcon
4620 VMC