PSC Falcon 4620 User Manual page 23

Top/Wall Mounting Assembly
4. Tighten the
5. Assemble the key-
6. To install the Power-
7. To install the base for
User's Guide
adjustment
knobs. The ring
pins and adjust-
ment knobs can
be adjusted again
once the entire
assembly is com-
plete.
board tray and
PowerScan RF
tray and put them
aside. Do not
connect the key-
board tray to the
computer back
plate until you
have installed all
accessories and
cables.
Scan RF mounting
tray, line up the three
holes on either the
right or left side of the
keyboard mounting
tray and affix with
three (3) screws and
lock washers.
the PowerScan, line up
the four holes on the
base with the four
holes on the mounting
tray and attach it with
the remaining four (4)
screws and lock wash-
ers.
Front View of the Mounting Assembly
Swing Arm Mounting Bracket
Computer Back Plate
Keyboard Mounting Bracket
Side View of the Mounting Assembly
Swing Arm Mounting Bracket
Attach the
PowerScan to
its Mounting
Bracket
Falcon 4620
Keyboard
9