Installing an RF Card
2. Insert the radio card with an
3. Insert the rubber bumpers into the dome. The rubber
4. Install the plastic radio dome cover for
5. Insert and tighten the two screws
Installing an RF Card with an External Antenna
Components
•
•
•
•
•
Tool required.
To install an Radio card with an external antenna, complete the following
steps:
1. Remove the cover from the PCM-
34
integrated antenna into the
PCMCIA card slot and press
firmly until the card is prop-
erly seated in the slot.
bumpers keep the radio card securely seated and from
being dislodged during vibration.
the Radio card slot.
enclosed with the radio kit.
Radio dome cover with hole and two screws
Radio card
Flexcable
Antenna
Rubber bumpers
A 2mm Hex driver.
CIA card slot by first removing the
two screws.
This slot is located on the top left
of the computer, with the screen
facing you.
®
Falcon
4620 VMC