PSC Falcon 4620 User Manual page 49

Installing an RF Card with an External Antenna
2. Insert the radio card
3. Connect the small end
4. Push the larger, threaded end
5. Place the locking washer and nut on
6. Tuck the middle section of the Flex-
7. Insert the rubber bumpers into the dome. The rubber
8. Insert and tighten the two screws
User's Guide
into the Radio card
slot, and press firmly
until the card is seated
tightly in the slot.
of the Flexcable to the radio card
as shown to the right.
through the largest hole in the
radio dome cover until the nut on
flex cable is aligned inside the
cover.
the threaded end of the Flexcable.
Tighten the locking washer and nut
until the Flexcable is securely seated.
cable into the radio card slot next to
the radio card and place the radio
dome cover over the card slot.
bumpers keep the radio card securely seated in the slot dur-
ing vibration.
included with the radio kit to affix the
radio dome cover to the vehicle mount
computer.
35