Adjusting The Brightness - PSC Falcon 4620 User Manual

Getting Started
1. Select
2. Click or tap the
3. Tap and briefly hold a pointing device (your finger or the stylus) on the
Figure 7. TouchScreen Calibration Utility

Adjusting the Brightness

Press the
Brightness
are located on the right side of the unit; refer to Figure 6 on page
location.
22
Start > Settings > Control Panels > Pointer Devices
dialog.
Devices Properties
Calibrate
open the applet as shown in
Calibrate
center of the target as the target moves around the screen.
• The calibration process will terminate if no touch is received within
10 seconds.
• Press to abort the calibration process.
ESC
Increase Brightness
button to decrease brightness. The brightness adjustment buttons
button at the bottom left of the dialog box to
Figure 7
button to increase brightness; press the
to open the
Pointer
, below.
Decrease
for their
20
®
Falcon 4620 VMC