Table of Contents
Advertisement
Top/Wall Mounting Components
Swing Arm Mounting Bracket
Use the top mount bracket to mount the unit with U-Bolts, nuts, and lock
washers to the roll bar on a vehicle, such as a fork lift.
•
•
•
•
•
Insert the locking ring pins into the holes on either side of the mounting
assembly after adjusting the computer back plate to the desired viewing angle.
Computer Back Plate
The computer back plate supports the
computer and connects to the wall mount
or top mount bracket.
•
•
Keyboard Mounting Tray
The keyboard mounting tray supports the
keyboard and connects to the computer
back plate.
•
•
•
User's Guide
One top mount bracket
Two (2) Locking Ring Pins
Four (4) U-Bolts (customer pro-
vided: 1 13/16" [7.1mm] spread)
Eight (8) lock washers
(customer provided)
Eight (8) nuts (customer
provided)
One computer back plate
Two (2) adjustment knobs
(included)
One keyboard mounting tray
Five (5) stainless steel 1/4"x20 and 1/
2" long screws (included)
Five (5) 1/4"x20 lock washers
(included)
7
Advertisement
Table of Contents
Troubleshooting
