PSC Falcon 4620 User Manual page 31

Ram Ball Mounting Assembly
Figure 4. Ram Ball, H Plate, and Keyboard Tray
Computer
H Plate
Keyboard
14. Align the four keyboard bracket holes (arranged in a circular pattern at
15. Place the flat surface of the remaining Ram Ball against the matching
User's Guide
Ram Ball
Keyboard Cord
2, 6, 10, and 12 o'clock) with the four matching holes in the back of the
Computer H Plate. Refer to
bracket should be aligned with the matching arch of the H Plate.
holes on the keyboard bracket and affix the Ram Ball to the Computer
H Plate and keyboard bracket with four screws. Refer to
Falcon 4620 Vehicle
Mount Computer
Power Cord
(Installed)
Keyboard
Bracket
. The the arch of the keyboard
Figure 4
12. Connect the key-
board to the key-
board bracket
with at least two
screws. The top
of the keyboard
will be oriented
in the bend of
the bracket.
13. Lay the vehicle
computer on its
face on a soft sur-
face. Orient the
computer with
its bottom edge
at the edge of the
table or surface
you are working
on. Allow the
cables to hang
down from their
ports.
.
Figure 4
17