Connect The Keyboard; Connect The Optional Powerscan Scanner - PSC Falcon 4620 User Manual

Installing the Falcon
Table 1. Falcon 4620 External Connector Ports
Feature
COM1 Port
COM2 Port
Ethernet
Keyboard Port
Mounting Holes
PCMCIA Card Slots
Power Connector
Sound Port
USB Ports

Connect the Keyboard

If you have one of the two industrial grade NEMA 4 keyboards, connect the 9-
pin D-Sub connector directly to the keyboard port.
Use the enclosed required adaptor if you are using the standard PS/2 keyboard.
Refer to "DB-9 to PS/2 Adaptor Cable" on page
the required adaptor.

Connect the Optional PowerScan Scanner

The PSC PowerScan bar code scanner requires the 12V of power on Pin 9 of
COM1.
Refer to "Setting up and Configuring a PowerScan" on page
mation on the PSC PowerScan, a decoded bar code scanner.
12
®
4620
RS-232 serial interface with12V power on pin 9 to power a decoded
serial bar code scanner, such as the PSC PowerScan.
COM2 is a RS-232 serial interface connectable to a serial device,
such as a printer or PC.
10/100 Ethernet Port; RJ-45 connector.
DB-9 connector. The Keyboard/Mouse adapter cable is used when
connecting the PS/2 Keyboard and/or external Mouse.
Used to mount the Falcon 4620 onto the computer back plate. The
four outer mounting holes take metric screws, size M6x20. The inner
set of holes are for a VESA mounting pattern.
Insert additional PC Cards here, such as radio cards, flash cards,
hard drives, etc. Screws are M3x6 metric.
Insert the DC power cord here with the arrow on the connector facing
towards you.
SB16 compatible sound port, requires adaptor splitter cable available
as an accessory. (Customer supplied speakers or headphones.)
There are two external USB ports. Use to connect external mouse,
USB CDROM (use only the PSC supplied), or a floppy drive.
Description
For more
information
page
n/a
page
page
page
page
page
page
page
for more information on
44
for more infor-
29
®
Falcon 4620 VMC
29
14
12
7
26
14
44
44