Ram Ball Mounting Assembly
When using Microsoft
the manufacturer's installation instructions.
You must install software drivers for some peripheral devices. Use one of three
methods for copying or installing a software driver onto the Falcon 4620:
•
•
•
To avoid hardware conflicts, PSC recommends that you use only the external CDROM
supplied by PSC.
WARNING
Ram Ball Mounting Assembly
The Ram Ball and Computer H Plate Mounting Assembly, shown in Figure 5
on page
assembly allows 360 degree rotation of the vehicle mount computer. It can be
mounted on any sufficiently sturdy flat surface: horizontal, vertical, or even
overhead.
Ram Ball Mounting Components
Tool required.
Allen wrench, depending upon which type of screws you receive.
• Ram/Ball Assembly and 8 screws
• Computer H Plate and 4 screws
• Keyboard Bracket and 2 screws
Mounting Bracket Assembly
To install the Ram/Ball/H Plate assembly, complete the following steps:
1. Loosen the large adjustment knob handle on the Ram Ball mount.
2. Remove both Ram Balls from the mount.
User's Guide
®
Windows
Transfer the files from an external USB CDROM drive.
Transfer the files from an external USB floppy drive.
Transfer the files over a network.
, combine to form an extremely a flexible mounting assembly. This
18
A #2 Phillips Head screwdriver or #4 Allen wrench, and #2
®
-based drivers and software, please follow
15