Scanner Mounting Tray; Top/Wall Mounting Assembly - PSC Falcon 4620 User Manual

Installing the Falcon

Scanner Mounting Tray

The scanner mounting tray supports the PSC PowerScan RF bar code scanner
and connects to the keyboard tray on either the right or left side.
•
•
•
Use three of the screws and lock washers to attach the scan-
ner mounting tray to the keyboard tray. Use the remaining four screws and
lock washers to attach the PowerScan RF base unit to the tray.

Top/Wall Mounting Assembly

All the parts for the Falcon 4620 mounting bracket are shipped to you unas-
sembled. To assemble the mounting bracket, complete the following steps:
1. Begin with con-
2. Insert the
3. Adjust the com-
8
®
4620
One scanner mounting bracket
Seven (7) stainless steel 8x32 3/8" long screws
(included)
Seven (7) 8x32 lock washers (included)
necting the top
mounting
bracket or wall
mount bracket to
the computer
back plate with
the largest hole
on the arm of the
top bracket or
wall bracket.
threaded end of
the adjustment
knobs into the
largest hole on
sides of the ter-
minal back plate.
puter back plate
to the desired angle and insert the ring pins to stabilize the assembly
Exploded View of the Mounting Assembly
Swing Arm Mounting Bracket
Computer Back Plate
Keyboard Mounting Tray
Locking Ring Pins
Adjustment Knobs
1/4x20" and 1/2" large
stainless steel screws
8x32" and 3/8" small
stainless steel screws
PowerScan
RF Mount-
ing Tray
®
Falcon 4620 VMC