Connect The Cables For Peripherals And Accessories - PSC Falcon 4620 User Manual

Top/Wall Mount Installation
5. Attach each accessory or peripheral to the appropriate connector cable as

Connect the Cables for Peripherals and Accessories

The external ports for the Falcon 4620 are located on the bottom back of the
unit (refer to Figure 2 on page
Table 1 on page
Figure 2. Falcon 4620 External Connector Ports
PCMCIA Flash or Radio card slot
Dimmer Buttons
Connect all the cables for the keyboards, PowerScan, and other peripherals
and accessories before attaching the keyboard mounting tray to the computer
back plate. To connect the standard Power adaptor, complete the following:
1. Remove the power cord stabilizer from the unit. Refer to
2. Firmly insert the power cord into the port with the arrow facing up.
3. Align and replace the power cord stabilizer, inserting the power cord
User's Guide
described in "Connect the Cables for Peripherals and Accessories" below.
.
2-12
Power Button
2 USB Ports
between the two plastic clamps and tightening the screws.
). For a description of each port, refer to
11
COM1
COM2
Keyboard/Mouse
Sound Port
Power Cord
Stabilizer
Power Connector
Ethernet
.
Figure 1
11