Replacing Wiper Blades - SMART for two coupé Operator's Manual

Detach electrical connectors ;.
X
Remove bulb =.
X
Insert the new bulb.
X
Attach electrical connectors ;.
X
Fit the license plate lamp unit on the
X
right and press gently on the left.
The license plate lamp unit must audibly
engage.
Replacing interior lighting lamps
A 12 V/10 W bulb is required.
Removing: Use a flat object to pry the
X
lamp lens : off from the passenger side.

Replacing wiper blades

Detach electrical connector ; from the
X
interior lamp.
Remove bulb = from mount ?.
X
Installing: Insert the new bulb.
X
Attach electrical connector ; to the
X
interior lamp.
Fit the lamp lens on the left in the open-
X
ing and press gently on the right.
The lamp lens must audibly engage.
Replacing wiper blades
About replacing wiper blades
G WARNING
For safety reasons, switch off the wipers
and remove the key from the starter switch
before replacing a wiper blade. The wind-
shield wipers could otherwise be set in
motion and cause injury.
G
WARNING
Wiper blades are components that are sub-
ject to wear and tear. Replace the wiper
blades at least twice a year, preferably in
the spring and fall. Otherwise the windows
will not be properly wiped. As a result, you
may not be able to observe surrounding
traffic conditions and could cause an acci-
dent.
! Hold on to the wiper when folding the
wiper arm back. If released, the force of
the impact from the windshield wiper
185
Z