Unlocking/Locking Manually; Brake Pads; Parking - SMART for two coupé Operator's Manual

Problem
A warning signal
sounds when parking.
You can hear a contin-
uous noise from the
front axle when brak-
ing.

Unlocking/locking manually

Unlocking the vehicle
You can unlock the driver's door and the
charge socket flap by unlocking the
driver's door using the key. The lock cyl-
inder is fitted with a cap.
Press button # on the key.
X
i
For replacing the transmitter battery
( page 178).
Y
Remove cap : from lock cylinder ;.
X
Unlock the driver's door.
X
The driver's door and the charge socket
flap are unlocked.
Possible causes/consequences and M M Solutions
You have not engaged the parking brake before releasing the
brake pedal and switching off the drive system.
Switch on the ignition to deactivate the acoustic warning.
X
Engage the parking brake.
X
Make sure the gear selector lever is in park position P.
X
Turn the key to starter switch position 0.
X
Remove the key from the starter switch.
X
For safety, it is important that you perform the parking pro-
cedure as described (
The vehicle is equipped with a mechanical/acoustic brake pad
indicator.
Have the brake pads checked at an authorized electric drive
X
smart center.
Unlocking/locking manually
page 77).
Y
i
To unlock the vehicle centrally press
the central unlocking switch in the upper
center console (
Y
Locking the vehicle
If you can no longer lock the vehicle using
the remote control and you do not have a
spare transmitter battery at hand, please
proceed as follows:
Open the driver's door.
X
Press the central locking switch
X
( page 53).
Y
The indicator lamp on the central lock-
ing switch comes on, when the starter
switch is in position 1.
The indicator lamp on the central lock-
ing switch flashes, when the starter
switch is in position 0.
Remove the key from the starter switch,
X
take it with you, and close all doors.
The vehicle is now locked.
page 27).
Z
177