Replacing Wiper Blades; Replacing Wiper Blade - SMART fortwo coupe Operator's Manual

Replacing wiper blades

174
X
Use a suitable tool to loosen the
corresponding license plate lamp unit at
jacking point :.
X
Carefully unclip the license plate lamp
unit.
X
Detach electrical connectors ;.
X
Remove bulb =.
X
Insert the new bulb.
X
Attach electrical connectors ;.
X
Fit the license plate lamp unit on the
right and press gently on the left.
The license plate lamp unit must audibly
engage.
Replacing the interior lighting
You need a 12 V 10 W bulb.
X
Removing: Use a flat object to pry the
lamp lens off from the passenger side.
X
Detach electrical connector : from the
interior lamp.
X
Remove bulb ; from its mount =.
X
Installing: Insert the new bulb.
X
Attach electrical connector : to the
interior lamp.
X
Fit the lamp lens on the left in the
opening and press gently on the right.
The lamp lens must audibly engage.
Replacing wiper blades
About replacing wiper blades
G
Warning!
For safety reasons, switch off the wipers
and remove the key from the starter switch
before replacing a wiper blade. The
windshield wipers could otherwise be set
in motion and cause injury.
G
Warning!
Wiper blades are components that are
subject to wear and tear. Replace the wiper
blades at least twice a year, preferably in
the spring and fall. Otherwise the windows
will not be properly wiped. As a result, you
may not be able to observe surrounding
traffic conditions and could cause an
accident.