Saving The Running Configuration - HP 7500 Series Installation Manual

1
2
The output shows that IRF port 2 of member switch 1 connects to IRF port 1 of member switch 2.
Table 24 Command output
Field
Switch
IRF-Port1
IRF-Port2
Link
neighbor
Belong To

Saving the running configuration

To save the running configuration, use one of the following methods:
Fast saving mode—Executing the save command without the safely keyword. This mode saves
•
configuration quickly but the configuration can be lost if a reboot or power failure has occurred
during the saving process. Use this mode if stable power supply is available.
• Safe mode—Executing the save command with the safely keyword. This mode takes more time to
save configuration, but it has no configuration loss risk even if the device reboots or the power
supply fails during the saving process. Use this mode in an unstable power supply environment or
for remote maintenance.
Use one of the following commands to save the running configuration:
Task
Save the running configuration to a
file other than the startup file for the
next reboot
DIS --
UP 1
Description
Member ID of the switch.
Information about IRF port 1, including its link state and neighbor.
Information about IRF port 2, including its link state and neighbor.
Link state of the IRF port:
•
UP—The IRF link is up and operating correctly.
•
DOWN—The IRF link is down, for example, for a link problem.
•
DIS—No physical port is bound to the IRF port.
The member ID of the switch that connects to this IRF port. If the IRF port does not connect
to any switch, two hyphens (--) are displayed.
The IRF fabric that the switch belongs to, represented by the CPU MAC address of the
master switch.
UP 2
DOWN --
Command Remarks
Available in any view.
•
The extension of the configuration file must
be .cfg.
•
You specify chassis chassis-number only when
the switch is in IRF mode.
save file-url [ all |
•
The all keyword saves the configuration to all
[ chassis
MPUs.
chassis-number ]
•
In standalone mode, if neither all nor slot
slot slot-number ]
slot-number are specified, the command saves
the configuration to the active MPU.
•
In IRF mode, if neither all nor chassis
chassis-number slot slot-number are specified,
the command saves the configuration to the
active MPU on the master switch.
71
00e0-fc0f-8c0f
00e0-fc0f-8c0f