Hardware management and maintenance
NOTE:
The command output depends on your software version.
Displaying information about the switch
Displaying software and hardware version information
You can use the display version command to display the switch software and hardware version
information, including the version of the running software and hardware, uptime of the switch, and type
and uptime of each MPU and LPU. The output of the display version command depends on your switch
model and software and hardware versions.
<Sysname> display version
HP Comware Platform Software
Comware Software, Version 5.20.99, Release 6620
Copyright (c) 2010-2011 Hewlett-Packard Development Company, L.P.
HP 7503 uptime is 0 week, 0 day, 6 hours, 57 minutes
MPU(M) 0:
Uptime is 0 weeks,0 days,6 hours,57 minutes
HP 7503 MPU(M) with 1 BCM1125H Processor
BOARD TYPE:
DRAM:
FLASH:
NVRAM:
PCB 1 Version:
PCB 2 Version:
Bootrom Version:
CPLD 1 Version:
CPLD 2 Version:
Release Version:
Patch Version
MPU(S) 1:
Uptime is 0 weeks,0 days,1 hours,23 minutes
HP 7503 MPU(S) with 1 BCM1125H Processor
BOARD TYPE:
DRAM:
FLASH:
NVRAM:
PCB 1 Version:
PCB 2 Version:
LSQ1SRP2XB
512M bytes
64M bytes
512K bytes
VER.B
VER.B
301
006
006
HP 7503-6620
:
None
LSQ1SRP2XB
512M bytes
64M bytes
512K bytes
VER.B
VER.B
55