Preparing for installation
The HP 7500 Switch Series includes the models in
Table 1 HP 7500 Switch Series
Product code
JD242B
JD243B
JD240B
JD239B
JD241B
JD238B
Safety recommendations
To avoid possible bodily injury and equipment damage, read all safety recommendations carefully
before installation. Note that the recommendations do not cover every possible hazardous condition.
General safety recommendations
•
Keep the chassis clean and dust-free.
Do not place the switch on a moist area, and avoid liquid flowing into the switch.
•
Make sure the ground is dry and flat and anti-slip measures are in place.
•
Keep the chassis and installation tools away from walk areas.
•
Do not wear loose clothing, jewelry (for example, necklace) or any other things that could get
•
caught in the chassis when you install and maintain the switch.
Electricity safety
Clear the work area of possible hazards, such as ungrounded power extension cables, missing
•
safety grounds, and wet floors.
Locate the emergency power-off switch in the room before installation so you can quickly shut power
•
off when an electrical accident has occurred.
Unplug all external cables, including power cords, before moving the chassis.
•
Do not work alone when the switch has power.
•
Never assume that power has been disconnected from a circuit. Always check.
•
Description
HP 7502 Switch Chassis
HP 7503-S Switch Chassis
HP 7503 Switch Chassis
HP 7506 Switch Chassis
HP 7506-V Switch Chassis
HP 7510 Switch Chassis
Table
1.
1
Alias
7502
7503-S
7503
7506
7506-V
7510