Adjusting Volume Settings - Nortel IP Phone 2002 User Manual

Standard
42
#
8
9

Adjusting volume settings

The volume settings submenu includes the following options:
1
2
3
4
5
NN42020-126 MCS 5100 Release 4.0
Config menu option
Reset Phone
Switch Controller
Tip: For quick selection, press the number on the dialpad that
corresponds to the menu item. Use the up and down navigation buttons
to scroll through the Configuration menu list. To reach the beginning of
the list, press the start (*). To reach the end of the list, press the pound
(#) button.
Note: Parameters that are specific to a line can be configured or viewed
using menu options. If several users are logged on to the telephone, then
the system prompts you to select your line button.
Ring Pattern
Handset Volume
Headset Volume
Handsfree Volume
Alerting Volume
Tip: You can adjust the handset, headset, handsfree, and alerting volume
when a call is ringing or while you are on an active call by using the
volume control bar located below the dialpad. The new volume setting
becomes the default for the telephone.
Note: If you configure a new volume setting using the volume submenu,
you must press the Save soft key in order to apply your new volume
setting.
Standard 01.05 March 2009