Universal Serial Bus Connectors - DFI G4V100-P User Manual

2.5.6 Universal Serial Bus Connectors

USB 2
USB 1
2
1
The system board supports 6 USB 2.0/1.1 ports. USB allows data
exchange between your computer and a wide range of
simultaneously accessible external Plug and Play peripherals.
Two onboard USB 2.0/1.1 ports (Black) are at location CN9 (USB
1-2) of the system board.
The J1 (USB 3-4) and J9 (USB 5-6) connectors allow you to
connect 4 additional USB 2.0/1.1 ports. The additional USB ports
may be mounted on a card-edge bracket. Install the card-edge
bracket to the system chassis then insert the connector that is
attached to the USB port cables to J1 or J9.
BIOS Setting
Configure the onboard USB in the Integrated Peripherals submenu of
the BIOS. Refer to chapter 3 for more information.
1 0
"
9
Hardware Installation
2
USB 3-4
USB 5-6
41