DFI G4V100-P User Manual page 80

3
BIOS Setup
3.1.4.4 USB Controller
This field is used to enable or disable the USB ports.
3.1.4.5 USB 2.0 Controller
If you are using USB 2.0, this field must be set to Enabled.
3.1.4.6 USB Keyboard Support
If you are using a USB keyboard under DOS, set this field to
Enabled.
3.1.4.7 USB Mouse Support
This field is used to enable or disable the USB mouse.
3.1.4.8 Init Display First
This field is used to select whether to initialize the onboard VGA or
PCI first when the system boots.
Onboard/AGP When the system boots, it will first initialize the
PCI Slot
80
onboard VGA.
When the system boots, it will first initialize PCI.