DFI G4V100-P User Manual page 68

3
BIOS Setup
Many disk diagnostic programs which attempt to access the boot
sector table will cause the warning message to appear. If you are
running such a program, we recommend that you first disable this
field. Also, disable this field if you are installing or running certain
operating systems like Windows
system may not install nor work.
3.1.2.3 CPU L1 and L2 Cache
This field is used to speed up the memory access. Enable the
external cache for better performance.
3.1.2.4 CPU L3 Cache
This field is used to enable or disable the CPU's L3 cache.
3.1.2.5 Hyper-Threading Technology (for Intel
with Hyper-Threading Technology)
This field is used to enable the functionality of the Intel
Processor with Hyper-Threading Technology and will appear only
when using this processor.
3.1.2.6 Quick Power On Self Test
This field speeds up Power On Self Test (POST) after you power on
the system. When Enabled, the BIOS will shorten or skip some check
items during POST.
3.1.2.7 First Boot Device, Second Boot Device, Third Boot Device and
Boot Other Device
Select the drive to boot first, second and third in the "First Boot
Device" "Second Boot Device" and "Third Boot Device" fields
respectively. The BIOS will boot the operating system according to
the sequence of the drive selected. Set "Boot Other Device" to
Enabled if you wish to boot from another device.
68
98/2000/ME/XP or the operating
®
®
Pentium
®
4 Processor
® ®
Pentium 4