DFI G4V100-P User Manual page 58

2
Hardware Installation
2.6.11 DIMM and PCI Standby Power LEDs
DIMM Standby Power LED
This LED will turn red when the system's power is on or when it is
in the Suspend state (Power On Suspend or Suspend to RAM). It
will not light when the system is in the Soft-Off state.
PCI Standby Power LED
This LED will turn red when the system is in the power-on, Soft-Off
or Suspend (Power On Suspend or Suspend to RAM) state.
58
Important:
If the DIMM Standby Power LED or PCI Standby Power LED is
lighted, you must power-off the system then turn off the power
supply's switch or unplug the power cord prior to installing any
memory modules or add-in cards.
DIMM Standby
Power LED
PCI Standby
Power LED