DFI G4V100-P User Manual page 70

Table of Contents

Advertisement

3
BIOS Setup
3.1.2.13 Typematic Delay (Msec)
This field allows you to select the delay between when the key was
first depressed and when the acceleration begins.
3.1.2.14 Security Option
This field determines when the system will prompt for the password
- everytime the system boots or only when you enter the BIOS
setup. Set the password in the Set Supervisor/User Password
submenu.
System The system will not boot and access to Setup will be
Setup
3.1.2.15 APIC Mode
Leave this field in its default setting.
3.1.2.16 MPS Version Control for OS
This field is used to select the MPS version used by the system.
3.1.2.17 OS Select for DRAM > 64MB
This field allows you to access the memory that is over 64MB in
OS/2. The options are: Non-OS2 and OS2.
3.1.2.18 Report No FDD For WIN 95
The options are Yes and No.
3.1.2.19 Small Logo(EPA) Show
Enabled The EPA logo will appear during system boot-up.
Disabled The EPA logo will not appear during system boot-up.
70
denied unless the correct password is entered at the
prompt.
The system will boot, but access to Setup will be denied
unless the correct password is entered at the prompt.

Advertisement

Table of Contents
loading

This manual is also suitable for:

G4v100-m

Table of Contents