DFI G4V100-P User Manual page 79

EPP Mode Select
This field is used to select the EPP mode.
ECP Mode Use DMA
This field is used to select the DMA channel used for the parallel port.
PWR Lost Resume State
Keep Off When power returns after an AC power failure, the
system's power is off. You must press the Power
button to power-on the system.
Turn On When power returns after an AC power failure, the
system will automatically power-on.
Last State When power returns after an AC power failure, the
system will return to the state where you left off
before power failure occurs. If the system's power is
off when AC power failure occurs, it will remain off
when power returns. If the system's power is on
when AC power failure occurs, the system will power-
on when power returns.
Onboard Serial Port 1, Onboard Serial Port 2, Onboard Serial
Port 3 and Onboard Serial Port 4
3F8, 2F8, 3E8, 2E8
Disabled
Serial Port 1 Use IRQ, Serial Port 2 Use IRQ, Serial Port 3 Use
IRQ and Serial Port 4 Use IRQ
These fields are used to select an IRQ for the onboard serial port 1,
2, 3 or 4.
Serial Port 1 Mode
COM 1 functions as either a serial port or IrDA. You cannot use
both at the same time.
Normal This option sets COM 1 as serial port.
IrDA This option sets COM 1 as IrDA.
Allows you to manually select an I/O
address for the onboard serial port 1, 2, 3
or 4.
Disables the onboard 1, 2, 3 or 4.
3
BIOS Setup
79