DFI G4V100-P User Manual page 46

2
Hardware Installation
2.6.2 S/PDIF-out Connector
The S/PDIF-out connector (J7) is used to connect an external
S/PDIF-out port. Your S/PDIF-out port may be mounted on a card-
edge bracket. Install the card-edge bracket to the system chassis
then connect the audio cable connector to J7. Make sure pin 1 of
the audio cable connector is aligned with pin 1 of J7.
46
4
GND
SPDIF out
"
Key
1
+5V