Line-In; S/Pdif-Out; Front Audio - DFI G4V100-P User Manual

1
Introduction
• LAN Connect I/F
• 1:1 transmit transformer ratio support
• Automatic detection of "unplugged mode"
IDE Interface
• Supports ATA/33, ATA/66 and ATA/100 hard drives
• PIO Mode 4 Enhanced IDE (data transfer rate up to 14MB/sec.)
Processor Socket
• Socket 478
Rear Panel I/O Ports
• 2 USB 2.0/1.1 ports
• 1 RJ45 LAN port
• 2 DB-9 serial ports
• 1 DB-15 VGA port
• 1 DB-25 parallel port
• 1 mini-DIN-6 PS/2 mouse port
• 1 mini-DIN-6 PS/2 keyboard port
• 3 audio jacks: speaker-out, line-in and mic-in
I/O Connectors
• 2 connectors for 4 additional external USB 2.0/1.1 ports
• 1 connector for COM 3 (RS232 or LVDS)
• 1 connector for COM 4 (RS232 or RS485)
• 1 44-pin connector for LVDS LCD panel
• 1 LCD/Inverter power connector
• 1 LCD brightness control connector
• 1 front audio connector for speaker-out and mic-in jacks
• 1 CD-in internal audio connector
• 1 S/PDIF-out connector
• 1 IrDA connector
• 1 40-pin IDE 1 connector for 3.5" HDD
• 1 44-pin IDE 2 connector for 2.5" HDD
• 1 floppy connector (FPC connector type)
• 2 ATX power supply connectors
• 1 Wake-On-LAN connector
• 1 chassis open connector
• 3 fan connectors
Expansion Slots
• 1 PCI slot for PCI expansion card or customized riser card for 1,
2 or 3 PCI slots expansion (for low profile PCI card only)
10