Universal Serial Bus Connectors - DFI SR100-L20C User Manual

2
Hardware Installation

Universal Serial Bus Connectors

USB 3
USB 2
USB allows data exchange between your computer and a wide
range of simultaneously accessible external Plug and Play peripherals.
The system board is equipped with four onboard USB 2.0/1.1 ports.
The USB 4-5 and USB 6-7 connectors allow you to connect 4
additional USB 2.0/1.1 ports. The additional USB ports may be
mounted on a card-edge bracket. Install the card-edge bracket to an
available slot at the rear of the system chassis then insert the USB
port cables to a USB connector.
BIOS Setting
Configure the onboard USB in the Advanced menu of the BIOS.
Refer to chapter 3 for more information.
34
USB 1
USB 0
1 0
2
1
9
r
LAN
USB 0
USB 1
USB 4-5
1
USB 6-7