System Log; Figure 37 Reboot; Figure 38 System Log - Korenix JetWave 2450 Series User Manual

System Log

System log is used for recording events occurred on the JetWave 2450, including station connection,
disconnection, system reboot and etc.
Open "System Log" in "Tools" as below.
Remote Syslog Server
Enable Remote Syslog: Enable System log or not.
IP Address: Specify the IP address of the server.
Port: Specify the port number of the server.
Chapter 5 Management

Figure 37 Reboot

Figure 38 System Log

Page 39